01
Mix at live events
Direct seat at FOH on real shows we produce — not a simulation, not a lab.
Live Band
Sound Engineering.
Practice and theory, taught together. Students train on real consoles at real shows — not lecture-room slides.
Fee
₹1,49,999
Duration
6 months
Included
Industrial training
Why this course is different
Ground-level practice and theory — taught together.
Most courses teach the theory in a classroom and call it a day. We don't. Every concept goes from desk to console to live stage in the same week — students hear the EQ change, feel the feedback they just caught, and read the meter while it happens.
That's the plus point. Theory makes sense when your hands are on the gear, and the gear stops being scary when you understand why each knob is there.
Why join us
Real consoles. Real bands. Real shows.
Five things every student walks out of the six months knowing how to do — not because we said so, but because they did them.
02
Real live band setup
Wire the stage, plot the inputs, run line check with the band that's about to play.
03
Hands-on digital console
Routing, EQ, compression, effects — practiced on the same desks the industry uses.
04
Mic placement & soundcheck
Drum kit, vocals, brass, strings. Where it goes and why — by hearing the difference.
05
Industry-level practical experience
Hours that count on a CV. Real venues, real bands, real pressure.
Curriculum · 6 months
Six modules. Practice in every one.
Module 01
Microphones & sound basics
- Types of microphones (Dynamic, Condenser, Wireless)
- Mic placement techniques for vocals and instruments
- Frequency and sound fundamentals
- Gain structure and signal flow
Module 02
Mixing console training
- Digital mixer operation
- Channel EQ and compression
- Effects — reverb and delay
- Monitor mixing and front-of-house mixing
- Hands-on practice on digital consoles
Module 03
Live band setup training
- Complete band wiring setup
- Stage plot understanding
- Line check and soundcheck process
- Working with singers and musicians
Module 04
PA system and speaker setup
- Speaker placement techniques
- Subwoofer and top balancing
- Feedback control
- System tuning basics
Module 05
Studio recording basics
- Recording vocals and instruments
- Audio interface use
- DAW software basics
- Multitrack recording
Module 06
Live event practical experience
- Real event setup experience
- Stage management basics
- Troubleshooting audio issues
- Working under live pressure
Industrial training included
Hours that count on a CV.
Sound Lab students join Yes2Music shows as crew during the course. Real schedules, real load-ins, real pressure — the part that no syllabus can simulate.
- Assist in live shows
- Work on real band setup
- Practice on industry-standard equipment
- Learn real industry workflow
Careers
Where graduates work.
The course is built backwards from where the work happens — so students walk out qualified for these roles, not adjacent to them.
- Live Sound Engineer
- Studio Assistant
- Mixing Engineer
- Event Sound Technician
- Freelance Sound Engineer
- Band Sound Engineer
- Production House Technician
Learn. Practice. Perform. Go Live.
We don't just teach. We make you capable.
Enrol
Limited seats per batch. Reach out on WhatsApp.
We confirm batches once seats are full so every student gets real console time. Drop a WhatsApp and we'll send batch dates and the next intake.
- Other lanes at Sound Lab
- DJ Professional · Jamming Studio →